KET-PMT-300 is a three phase network analyzer with a built in backlighted display to show measured values. Direct access to setup is provided through local menu.
The analyzer can be used for current reading using Rogowski transducers and is suitable for voltage range up to 600 Vac (50 Hz or 60 Hz).
The following electrical values are provided: Vrms, Irms, Watts (bi-directional), Var, VA, frequency, Cosφ, bidirectional energy.
All values can be acquired via serial communication both in floating-point format that normalized.
KET-PMT-300 is equipped with CANopen, RS485 and UART-TTL communication ports.
|Power Supply||10 ÷ 40 V DC, 19..28 V AC (50-60 Hz)|
|Consumption||Max 2.5 W|
|Insulation||3750 V AC between measure inputs and other circuits 1500 V AC between power supply inputs and communication ports 1500 V AC between power suply inputs and retransmitted output|
|ESD protection||4 kV|
|Insertion types||Single phase, Aron (three phase and 2 tranducers), Four wires (three phase and 3 tranducers)|
|External tranducers||Rogowski Commercial CT with 5A secondary max, typical accuracy 0.5%tranducers, max 100 mV RMS output|
|Operating condition||-10 ÷ +65 °C 30 ÷ 90% not condensing|
|Precision||0,2% (excluding the transducer error)|
|Display||2 rows x 16 chars display|
|Connections||Screw clamp connectors 5.08 mm|
|Enclosure||Plastic material UL V0|
|Dimensions||105 x 89 x 60 mm (W x H x D) (6 moduli DIN)|